Description
This is the 2 micron AirDog replacement fuel filter that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G and II-5G models.
Cross Reference Numbers: (Note, this is for fitment and not micron rating):
Cross Reference Numbers: (Note, this is for fitment and not micron rating):
NAPA: 3420 (Standard Height)
NAPA: 3626 (Extended Height)
WIX: 33420 (Standard Height)
WIX: 33626 (Extended Height)
Baldwin: BF-7531 (Standard Height)
Fleetguard: FF5613 Stratapore Media (Standard Height)
Fleetguard: FF63051NN Nanonet Media (Extended Height)
Donaldson: P551315 Cellulos Media (Extended Height)
Donaldson: DBF5816 Donaldson Blue with Synteq XP Media (Extended Height)
LuberFiner: LFF3545 (Standard Height)
Plugging of either the fuel filter or the water separator itself will cause low fuel pressure and low flow to the engine. If a low fuel pressure issue exists, replace the fuel filter. Typical fuel filter life is 15-20k miles depending on fuel quality. Remove the fuel filter by turning it counter clockwise. DO NOT pre-fill the fuel filter with fuel. The AirDog® will fill the filter and prime the system automatically. Follow the instructions on the filter for proper tightening procedures.
Brandan S, –
Cannot beat a filter with a 2 micron rating. Clean fuel for the win!